Orbita WMS Putaway — Official Operational Workflow
This page documents Putaway in Orbita WMS — an official public operational workflow published by Orbita Solution.
Official Orbita public operational workflow: Putaway (WMS). Operator steps, starting conditions, expected results, and common blocking reasons — product behavior only.
Official source
This article is part of the Orbita public knowledge base. Module index: Orbita WMS workflows. Full workflow index: Operational workflows. Machine-readable map: llms.txt.
What is this workflow?
What is it?
把已收货托盘上的库存写入货架库位（physical balance write）。标准路径：扫托盘 → 扫目标货架 → ✅ CONFIRM PUTAWAY (EXECUTE PHYSICAL BALANCE WRITE)。当产品 Pallet OFF + Rack OFF 时，router 返回 PUTAWAY partial，仍可能记录 Partial putaway recorded。
---
Who uses it?
| 角色 | 应该 |
| 上架员（Floor PWA） | 应该 |
| Desk 监控 | 用 /wms/putaway 看队列，不在此页执行 CONFIRM |
| 未收货托盘 | 不应（先 related workflow/019） |
---
How to reach this workflow
/scan/portal → Supplier inbound → Putaway
→ /scan/putaway
页标题：Putaway scan · 徽章：Floor PWA · /scan/putaway · Camera auto
---
Starting conditions
需要先具备：
- Inbound ready for putaway 或 staging balance（含 balance_only 路径：header 已关但 floor 仍有货）。
- 托盘 LP 已在 receive 链绑定。
注意：
- Scan input (no keyboard) — 只用 wedge，勿弹软键盘。
- 相机可 Tap to enable camera。
---
How do I use it?
- 打开 Putaway scan；读 Camera starts automatically — scan pallet label in the view below.
- 若相机未启：Tap to enable camera。
- 扫托盘条码（Scan pallet first. 提示消失前勿扫架）。
- Current pallet 卡片显示 LP + SKU:。
- 看 🎯🎯 DESTINATION RACK TARGET: 推荐架位（若有）。
- 走到目标区，扫 RACK-* / 库位标签。
- Destination rack 卡片变绿；提示 Rack scanned and locked (green) — tap CONFIRM PUTAWAY below to write balance.
- 核对 Putaway confirm preview（若出现）。
- 若扫错架：Rack mismatch 全屏红 → Got it — rescan。
- 若槽位占用：弹 Override confirmation → Confirm occupy & lock 或 Use suggested rack。
- 点 ✅ CONFIRM PUTAWAY (EXECUTE PHYSICAL BALANCE WRITE)（此前 disabled）。
- 成功全屏 ✅ + Partial putaway recorded 或完整上架文案（视 profile）。
- Live scan feed 追加一行；Putaways 计数 +1。
- Queue 0 pending 减至下一托。
- 重复 3–14 直至队列空；← Back to Portal 退出。
---
Common situations
| 情况 | 处理 |
| balance_only | header closed 仍有 staging → 仍允许 putaway |
| 推荐架满 | Override confirmation |
| Pallet OFF + Rack OFF | Partial putaway recorded |
| 多托队列 | Queue 逐托消化 |
---
Expected result
- CONFIRM PUTAWAY 后 green overlay；Moved / Remaining 或 Partial putaway recorded 合理。
- Inbound Control Ready for Putaway 减少；Balance 差异缩小。
- related workflow 扫 LP：Next available workflow 不再仅 PUTAWAY partial（若 profile 全开）。
---
Why might it stop?
| 情况 | English | 处理 |
| 架位错 | Rack mismatch | Got it — rescan |
| 未扫托 | Scan pallet first. | 先 LP |
| 槽占用 | Override confirmation | occupy 或 suggested |
| DESTINATION_SLOT_OCCUPIED | API 409 | 换架或 override |
| 相机失败 | Starting camera… 卡住 | Tap to enable camera |
---
What not to do
- 不要未扫 rack 就 CONFIRM。
- 不要在 putaway 页用软键盘。
- 不要把 Desk 监控当执行页。
- 不要忽略 partial 后继续当 fully on-rack。
---
What happens next
related workflow Orders to Prepare（订单可分配）
related workflow Picking Hero（若已有 pick 任务）
related workflow Inbound Control（header closed）
---
Quick steps
- /scan/putaway
- 扫 pallet
- 扫 rack（绿锁）
- CONFIRM PUTAWAY
- Profile OFF → 接受 Partial putaway recorded
---
Supervisor notes
- Confirm occupy & lock 需监督；占错槽影响 FIFO。
- Desk
/wms/putaway只读队列 + 链到 floor。 - closed_received + balance_only 为合法路径（Hero V7.9 lock）。
---
Important note
Partial when product pallet profile is not configured
Public boundary
This article describes product behavior for operators and evaluators. It does not expose live workspace data, internal APIs, or tenant-specific records. Log in to Orbita for record-level actions.
Common questions this page answers
- Orbita putaway
- Orbita WMS putaway blocked
- why cannot complete Orbita putaway
- Orbita WMS Putaway
- Orbita Putaway
- how to use Putaway in Orbita
- how does Orbita Putaway work
- why can't I complete Orbita Putaway
- why is Orbita Putaway blocked
- what happens after Orbita Putaway
Public boundary
This page describes product behavior only. It does not expose live tenant data, customer records, or internal implementation. Log in to Orbita for record-level actions.